Tp Link Eap Controller For Mac

 



Dimensions7.1 x 7.1 x 1.9in. (180*180*47.5mm)
Networking InterfaceGigabit Ethernet (RJ-45) Port *1（Support IEEE802.3at PoE）
ButtonsReset
AntennasInternal Omni 2.4GHz: 3* 4dBi 5GHz: 3*4dBi
Wifi StandardsIEEE 802.11ac/n/g/b/a
Power SupplyPoE or External 12VDC / 1.5A Power Supply
Maximum Power Consumption12.7 W
MountingCeiling /Wall Mounting (Kits included)
Frequency2.4GHz and 5GHz
Signal Rate 5GHz:Up to 1300Mbps 2.4GHz:Up to 450Mbps
Wireless Functions Multiple SSIDs（Up to 16 SSIDs, 8 for each band） Enable/Disable Wireless Radio Automatic Channel Assignment Transmit Power Control （Adjust Transmit Power on dBm） QoS(WMM) Band Steering Load Balance Rate Limit Reboot Schedule Wireless Schedule Wireless Statistics based on SSID/AP/Client
Wireless Security Captive Portal Authentication Access Control Wireless Mac Address Filtering Wireless Isolation Between Clients SSID to VLAN Mapping Rogue AP Detection 802.1X Support 64/128/152-bit WEP / WPA / WPA2-Enterprise, WPA-PSK / WPA2-PSK
Transmission Power CE： ≤19dBm(2.4GHz) ≤23dBm(5GHz) FCC: ≤25dBm(2.4GHz) ≤27dBm(5GHz) MANAGEMENT EAP Controller Software Yes Email Alerts Yes LED ON/OFF Control Yes Management MAC Access Control Yes SNMP Yes System Logging Local/Remote Syslog Local/Remote Syslog Telnet Yes Web-based Management HTTP/HTTPS L3 Management Yes Multi-site Management Yes Management VLAN Yes
Omada Controller Software Yes
Email Alerts Yes
LED ON/OFF Control Yes
Management MAC Access Control Yes
SNMPYes
System Logging Local/Remote Syslog Local/Remote Syslog
TelnetYes
Web-based Management HTTP/HTTPS
Management VLAN Yes
CertificationCE, FCC, RoHS
Package ContentsAC1750 Wireless Dual Band Gigabit Access Point EAP245 Power Adapter Mounting Kits Installation Guide
System RequirementsMicrosoft Windows XP, Vista, Windows 7, Windows 8, Windows10
EnvironmentOperating Temperature: 0℃~40℃ (32℉~104℉) Storage Temperature: -40℃~70℃ (-40℉~158℉) Operating Humidity: 10%~90% non-condensing Storage Humidity: 5%~90% non-condensing

TP-LINK 300Mbps Wireless N Ceiling Mount Access Point (EAP110). EAP Controller Software, Supports passive PoE, Captive portal for Wi-Fi guests.

Controller

Dear @batibotsky,

Thank you for the reply. I appreciate it very much. I was hesitant for awhile disturbing the system because I read somewhere that some users experienced their authentication (voucher) became non existent and anyone can access after a shut down of the omada controller and the eap was left running, when the system went online anyone can access the network with previous authentication or non. But I guess it was a bug that was fixed with the updates in firmware and software.

Welcome~Glad to know if I can help here. In normal case, if the Omada Controller is shut down but the EAP is still running, voucher authentication will no longer be provided until the Omada Controller comes back to work again, so newly connected clients can’t pass the authentication while authenticated clients keep the previous authentication status and can go to the Internet.

  • Find the data file associated with EAP Controller on the current PC and move it to the PC where you want to install the EAP C. Uninstall EAPC on the current PC and install it on the new PC. Replace the data with the data file copy from the first PC.
  • The MAC address can be found at the bottom of the EAP. Go to Tool to download EAP Discovery Utility. EAP Discovery Utility is a software that can scan all EAPs in the same network segment.

Related FAQ for your reference, https://www.tp-link.com/support/faq/1041/

For your case, I think your EAP will lose power for a while if the switch is used to supply power, so it is a different thing from above.